Catalogue
Fifteen fastener families held to DIN, ISO and ANSI/ASME dimensions. Filter by family, then read the quantity breaks on the product page — no “contact us for pricing”.
DIN 933 · ISO 4017
Fully threaded hex bolt, property class 8.8 as standard, M6 to M30. The workhorse fastener for steel structures, machinery frames and general assembly.
DIN 931 · ISO 4014
Partially threaded hex bolt for shear-critical joints where an unthreaded shank must bear the load.
DIN 6923
Flange nut with a serrated bearing face that spreads clamp load and resists loosening on thin sheet.
DIN 985
Prevailing-torque lock nut with a moulded nylon collar for vibration-prone joints. Reusable up to five cycles.
DIN 125 · ISO 7089
Hardness-controlled flat washer, 200 HV, for distributing clamp load under bolts and nuts.
DIN 127
Heat-treated 65Mn spring washer that keeps preload on joints exposed to vibration and thermal cycling.
DIN 912 · ISO 4762
Class 12.9 alloy socket screw with a machined hex socket and controlled decarburisation. M5 to M20.
DIN 916
Cup-point set screw, class 45H, for locking shafts, collars and pulleys against rotation.
DIN 7504 K/N
Case-hardened self-drilling screw that drills, taps and fastens 1–6 mm steel in one pass.
DIN 603
Domed-head carriage bolt with a square neck that locks into timber and stops the bolt from turning.
DIN 580
Forged lifting eye bolt with a seamless eye and a stamped working load limit. M8 to M24.
DIN 975
1 m and 3 m threaded rod in class 4.8 or 8.8, cut square and chamfered for easy nut starting.
ETA-tested clip geometry
Through-bolt wedge anchor for cracked and uncracked concrete, supplied with nut and washer.